This is first time to configure lm_sensors
- dloaded the source using wget ftp://ftp.netroedge.com/pub/lm-sensors/lm_sensors-3.1.0.tar.bz2
- extracted the file using bunzip2 and tar
- compiled source and did "make install"
- ran sensors-detect to find out which sensor i have
- loaded sensor driver (follow the output of sensors-detect!)
- run "sensors -s" and then "sensors"
didnt feel it would be so easy. having net connectivity to the box helped!
# sensors
smsc47m192-i2c-0-2d
Adapter: SMBus I801 adapter at 2000
in0: +2.55 V (min = +0.00 V, max = +3.32 V)
Vcore: +1.15 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.28 V (min = +2.97 V, max = +3.63 V)
+5V: +4.97 V (min = +4.50 V, max = +5.50 V)
+12V: +12.25 V (min = +10.81 V, max = +13.19 V)
VCC: +3.28 V (min = +2.97 V, max = +3.63 V)
in6: +1.57 V (min = +0.00 V, max = +1.99 V)
in7: +1.76 V (min = +0.00 V, max = +2.39 V)
SIO Temp: +51.0°C (low = -127.0°C, high = +127.0°C)
temp2: +63.0°C (low = -127.0°C, high = +127.0°C)
temp3: +57.0°C (low = -127.0°C, high = +127.0°C)
I haven't forgotten my way around in Linux yet! This is perhaps after many years I am sitting the the box for RnD, Thanks to Intel Atom :)
time to sleep! zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
